![]() ![]() If everything is good, you should be able to have local access to your nas via the direct-connect ethernet cable AND internet access via your airport wireless interface. Go back to the mac mini's Network system preferences and turn Airport back ON. Once setup is complete, and depending on how you want to use the nas, the user's manual has detailed instructions on how to use the nas various ways in which you want it mounted, etc. Depending on what web browser you use, it probably is in your 'Downloads' folder. When you click the 'Browse' button navigate to where you downloaded and extracted the firmware. Then proceed with the rest of the setup process. I would download th e latest user's manual from here also for easy future reference.Remember to double-click on the downloaded file to unzip it first. If you are not able to skip the firmware update stage of the setup then open up a browser window and head over to qnap's download area: select your nas model and download the latest firmware file to your mac. The correct file format should have an extension of. You'll need to double-click the downloaded file to unzip it prior to running the Setup program. The 'Browse' dialogue is just to show the Setup Wizard where you downloaded (and unzipped the firmware file). The firmware files are downloaded from QNAP to your local mac you'd need to do that separately and in advance of running any admin functions on the nas. Firmware update can be done at later time. We just want to get the nas in a stable setup right now. Let me know if you're able to connect to the nas.Īs for the firmware update stage of the setup process I would try to skip that if there is an option to do so. Now open up a browser and try to connect to the nas by typing in the url of Click on the 'Appletalk' tab and make sure the 'Make AppleTalk Active' button is checked. Click on the 'Advanced' button near the bottom of the Network preference pane. So you want the mini to use the same subnet with the ethernet interface. Reset the NAS settings by holding the reset button for three seconds. This is not documented in the official manual but is mentioned by users on the Qnap forums. Apparently you can do a safe shutdown by holding the button for three seconds. In the user's manual of the TS-409, the default ip address of the nas is set to 169.254.100.100 (I believe this applies to all their nas units). Rebooted using the button on the front of the 653D NAS. Make sure to click the 'Apply' button to confirm the settings.Ģ) Set the 'Built-in Ethernet' interface to Manual. You want the airport router to assign an ip address to the mini via the airport interface. Please follow those instructions to get in touch. We have sent you an email instruction to get connected with our technical support team. We certainly understand your concern, we apologize for the difficulties. When I switch the AVG firewall off, qfinder does his job. You want all internet traffic to use the wireless airport interface and your local backups/shares to the nas using the ethernet wired interface.ġ) Set the 'Airport' interface to DHCP (not Manual and not DHCP with manual setup). Qnap qfinder does not find NAS, although qfinder is allowed in AVG firewall. I think I understand your network setup now. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |